B
BODY
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
21
Repair and Service Manual
668061
.
Fig. 7 Quarter Panel and Front Fender Liner
Door Removal
Fig. 8 Door
Tool List
Qty.
Ratchet ........................................................................1
Socket, 15mm..............................................................1
Wrench, 15mm ............................................................1
Torque Wrench, ft. lbs..................................................1
1.
Remove the bolts (15), nuts (16) and hinge plate (8)
that secure the door (1) to the upper and lower door
2.
Remove the door from the vehicle.
3.
Installation is the reverse order of removal.
4.
Tighten the hardware to torque specified below.
5.
Adjust the position of the striker plate or door as
needed after installation to allow the doors to latch
properly.
1
11
13
10
9
14
Front of Vehicle
Cowl
8
Front of Vehicle
15
1
16
Item
Torque Specification
15, 16
22 - 26 ft. lbs. (30 - 35 Nm)
Summary of Contents for Stampede 900 2017
