20
21
Radio-controlled grill and meat thermometer
Dispose of the packaging in an environmentally friendly man-
ner using the collection systems that have been set up.
Disposal of the electrical device
Remove non-permanently installed batteries and
rechargeable batteries from the device and dispose
of them separately.
This product is labelled in accordance with the EU
Waste Electrical and Electronic Equipment Directive
(WEEE).
Please do not dispose of this product in ordinary
household waste. As a consumer, you are required
to take end-of-life devices to a designated collection
point for the disposal of electrical and electronic
equipment, in order to ensure environmentally-
compatible disposal. Observe the current regula-
tions in place!
Disposal of the batteries
Never dispose of empty batteries and rechargeable
batteries with ordinary household waste. They con-
tain pollutants which, if improperly disposed of, can
harm the environment and human health. As a con-
sumer, you are required by law to take them to your
retail store or to an appropriate collection site
depending on national or local regulations in order
to protect the environment.
The symbols for the contained heavy metals are:
Cd=cadmium, Hg=mercury, Pb=lead.
WARNING!
Environmental and health damage
caused by incorrect disposal of batteries!
11. Specifications
Receiver
Measuring range Meat:
0 °C…+300°C
(+32 °F... +572 °F)
°C/°F-reversible
Resolution:
1°C/1°F
HHH/LLL:
Temperature is outside
measuring range
Count-up and
max. 23 hours
count-down timer:
and 59 minutes
Radio-controlled grill and meat thermometer
• Should water or steam enter the socket, it could affect the
contact with the probe. Dry the plug connector with a cloth
before you connect it to your transmitter.
• Turn off the instruments after use.
• Remove the batteries if you do not use your instruments for
a long period of time.
• Keep the instruments in a dry place.
8.1 Battery replacement
• Change the batteries of the transmitter (REMOTE) or the
receiver (MAIN) when the battery symbol appears on the
display of the receiver.
•
Please note:
When the batteries are changed, the contact
between transmitter and receiver must be restored – so
always insert new batteries into both units or start a manual
transmitter search.
9. Troubleshootings
Problems
Solutions
No display
➜
Turn on the instruments
(at first the receiver and
afterwards the transmitter)
➜
Ensure correct polarity of
the batteries
➜
Change the batteries
Incorrect display
➜
Change the batteries
➜
Check the contact of the
plug to the socket,
wipe dry if necessary
Display is flashing and
➜
Reduce the distance
a beep tone is heard
between transmitter and
→
no contact between
receiver (max. 40 m)
transmitter and reveiver
➜
Check if there is any
source of interference
➜
Manual transmitter search
➜
Restart according to the
manual
Temperature displayed
➜
Check the position of the
is too high
probe in the meat
10. Waste disposal
This product and its packaging have been manufactured using
high-grade materials and components which can be recycled
and reused. This reduces waste and protects the environment.
TFA_No_14.1504_Anleit_11_21 06.11.2021 10:00 Uhr Seite 11
