30
The hour display can be selected to show hours in 12-hour or 24-hour settings.
(Default 24-Hour).
1.
Use the OUT/+ key to toggle between “12H” or “24H”.
2.
Confirm with the SET key and enter the Manual time setting.
MANUAL TIME SETTING:
In case the weather station cannot detect the DCF-signal (for example due to
disturbances, transmitting distance, etc.), the time can be manually set. The
clock will then work as a normal Quartz clock.
1.
The hour digit will start flashing.
2.
Use the OUT/+ key to set the hour.
3.
Press again the SET key to set the minutes. The minute digits start
flashing.
4.
Use the OUT/+ key to set the minutes.
5.
Confirm with the SET key and enter the
Calendar setting
.
Note:
The unit will still try and receive the signal despite it being manually set. When it
does receive the signal, it will change the manually set time into the received
time. During reception attempts the DCF tower icon will flash. If reception has
been unsuccessful, then the DCF tower icon will not appear but reception will still
be attempted the following day.
CALENDAR SETTING:
The date default of the weather station is 1. 1. 2011. Once the radio-controlled
time signals are received, the date is automatically updated. However, if the
signals are not received, the date can also be set manually.
1.
The year starts flashing.
2.
Use the OUT/+ key to set the year (between year 2011-2029).
3.
Press the SET key again to confirm and to enter the month setting. The
month starts flashing.
4.
Use the OUT/+ key to set the month.
Hour flashing
Minutes flashing
Year
Date and month (24hr time format)
Month and date (12hr time format)
Summary of Contents for 35.1078.10.IT
Page 1: ...110 115mm ...
