There are 11 different sections in the Settings main screen. Press the “
” or “
” arrows to navigate
through the sections. Once the curser has highlighted a desired section press the [ENTER] button to
confirm the selection. Use the 4 direction keys to make the appropriate changes to the setting, press the
[ENTER] button to confirm the change.
Once you have completely finished making changes press the [ESC] button to return to the main menu.
6.1 How to adjust the clock time and the time format (when no RCC reception)
•
Press “
” or “
” arrows to scroll up/down the list for TIME. TIME turns into yellow.
•
Press [ENTER] and the hour digits turn into yellow. Use the direction keys to change hours, minutes
and seconds. Press [ENTER] to confirm, and the time format turns into yellow.
•
Press “
” or “
” arrows to choose 12 HR or 24 HR system. Confirm with [ENTER] button.
6.2 How to adjust the date and the date format
•
Press “
” or “
” arrows to scroll up/down the list for DATE. DATE turns into yellow.
•
Press [ENTER] and the date digits turn into yellow. Use the direction keys to change day, month and
year. Press [ENTER] to confirm, and the date format turns into yellow.
•
Press “
” or “
” arrows to change the date format to DD-MM (day/month) or MM-DD (month/day).
Confirm with [ENTER] button.
6.3 How to enable/ disable DAYLIGHT SAVING function
•
Press “
” or “
” arrows to scroll up/down the list for DAYLIGHT SAVING TIME;
•
Default setting is: Enable. Press [ENTER] and the “Enable” is highlighted in yellow
.
Toggle “
” or
“
” arrows to change the setting between Disable and Enable.
•
Press [ENTER] to confirm and exit the setting.
6.4 How to change the setting for TEMPERATURE Unit
•
Follow the similar steps to activate for appropriate setting mode;
•
Toggle “
” or “
” arrows to change the setting between Celsius and Fahrenheit;
•
Press [ENTER] to confirm and exit the setting.
6.5 How to change the setting for PRESSURE Unit
•
Follow the similar steps to activate for appropriate setting mode;
•
Toggle “
” or “
” arrows to change the unit setting between hPa, mmHg or inHg;
•
Press [ENTER] to confirm and exit the setting.
6.6 How to change the setting for ALTITUDE compensation
•
Follow the similar steps to activate for appropriate setting mode;
•
Toggle “
” or “
” arrows to change the unit setting between meter and foot;
•
Press [ENTER] to confirm altitude unit setting and proceed setting for height compensation.
•
Press “
” or “
” arrows to change the Altitude setting (from -100 to +2500 m / -330 to +8250 ft);
press [ENTER] to confirm and exit the setting.
6.7 How to change the setting for slide show duration
•
Follow the similar steps to activate for appropriate setting mode;
•
Toggle “
” or “
” arrows to change the time setting from 0 (as fast as possible) to 60 seconds.
•
Press [ENTER] to confirm and exit the setting.
