6.9 How to change the setting for Country- City
•
Follow the similar steps to activate for appropriate setting mode;
•
Toggle “
” or “
” arrows to change the COUNTRY setting; press [ENTER] to confirm and proceed
setting for city;
•
Toggle “
” or “
” arrows to change the CITY setting; Press [ENTER] to confirm and exit the
setting.
6.10 How to install remote sensor
•
Use the “
” or “
” arrows to navigate the yellow highlight to the “INSTALL REMOTE SENSOR”,
press [ENTER] and the “Yes” becomes high lighted into yellow colour. Press [ENTER] to trigger
installation process.
•
The screen turns into sensor searching page:
Prepare you remote sensor to link up with the frame unit by follow the step procedure as descripted on
“C. Setting procedure to link up with the frame unit”
When the Frame is able to locate remote sensor, it will display the temperature and humidity on the
appropriate channel position as the below image.
•
The frame will display “Sensor not found” for channel failed in registration, and those channels not
being used. If necessary, check the batteries and try it again. Check if there is any source of
interference.
•
Each time when the frame is activated for installing sensor, it will continue searching for 2 minutes.
Repeat the install sensor procedure once again for extra sensor.
6.11 How to proceed MASTER RESET
•
Proceed master reset when unit found malfunction;
•
When confirm “Yes”, all the setting will return to factory default except the time and date is still
keeping.
Note:
To escape from the SETTINGS menu and return to the Main Menu, press [ESC] key.
7.
PC CONNECTION
The IMAGE weather station can be connected to a computer to act as a card reader for file transfer
from a memory card onto your computer’s hard drive.
Windows® Vista™/XP/XP Pro/2000 SP3 and Mac OS Users
