19
3.
After the batteries are inserted, the weather station will start receiving data signal from the transmitter.
The outdoor temperature and humidity data should then be displayed on the weather station. If this
does not happen after 2 minutes, the batteries will need to be removed from both units and reset from
step 1.
4.
In order to ensure successful 868 MHz transmission, the distance between the weather station and
the transmitter should be within 100 meters (see notes on “
Positioning
” and “
868 MHz Reception
”).
FUNCTION BUTTONS
Weather station:
The weather station has five easy to use function buttons:
SET
button
•
Press and hold for 3 seconds to enter manual setting modes: LCD contrast, Daylight Saving Time
ON/OFF, manual time, calendar and relative air pressure reference value
•
To stop the alarm sound
•
To exit alarm setting mode and country/city setting mode
•
To toggle between relative and absolute air pressure display
+
button
•
To increase/change values in setting modes
•
To stop the alarm sound
MIN/MAX
button
•
Press the button to switch among the display of MIN/MAX indoor temperature and MIN/MAX outdoor
temperature records
•
To decrease/change values in setting modes
•
Press and hold the button for 3 seconds to reset
ALL
indoor/outdoor MAX/MIN temperature
recordings to current readings
•
To stop the alarm sound
ALARM
button
•
To activate/deactivate the alarm and display alarm time
•
Press and hold for 3 seconds to enter the alarm setting mode
•
To stop the alarm sound
•
To exit manual setting mode and country/city setting mode
SUN
button
•
To switch among the display of date (normal mode), seconds, sun duration and city
SET
button
+
button
MIN/MAX
button
ALARM
button
SUN
button
