27
26
METEOTIME PRIMO –
Weather Info Center
• The test takes about 1 minute. You can start the test with the
TEST
button and end the test at any time by
pressing the
TEST
button.
7.2 Switch time + date
↔
city
↔
alarm
• You can press the
SET
button to switch from the display of the time and date to city, weekday alarm (W-ALM),
single alarm (S-ALM) and pre-alarm (P-ALM).
7.3 Select country and city
• Press and hold the
SET
button for 3 seconds in normal mode,
LAND EINST.
(COUNTRY in English) appears on the
display. Press the
+
or
–
button to select the country. For instance: If
D/GER
appears in the info box, you have
selected “Germany”.
• Press the
SET
button to confirm the country.
STADT EINST.
(CITY in English) appears on the display.
• Then, press the
+
or
–
button to select the city. For instance
frankfurtM
is the city of Frankfurt/Main.
• Press and hold the
+
or
–
button for fast mode.
• Press the
SET
button to accept the setting.
• On the display appears
EINST.VORG
. (EXIT in English).
• A table for the choice of location can be found in the Meteotime Booklet.
7.3.1 Activate favourites
• Once you have set your city as described above, you may select more cities for easy access.
• Instead of terminating the setting with the
SET
button, continue as follows:
• If ‘Frankfurt/Main’ is your selection as one of your favourite cities, then press the
TEST
button to confirm. A
will be shown on top of your selected city, and it will be stored into your personal memory list.
• Now, you can press the
+
or
–
button to select more cities in the same country, and then press the
TEST
button to confirm.
• If you wish to select cities from different countries, exit the setting with the
SET
button and re-enter it again as
described above in order to change the country.
• You may select a maximum of five cities as favourites. If you want to add more cities, then
SPEICHER .V
(MEMFULL in English) appears on the display.
• When all settings are done, press the
SET
button to confirm and exit the setting mode.
NOTE:
If after inserting the batteries for the first time, you are skipping the city selection, the device will select
“Frankfurt/Main” as your selected city by default.
METEOTIME PRIMO –
Weather Info Center
7.3.1.1 Display of favourites
• If you have selected more than one city as favourite, for example “Frankfurt/Main”, “Paris” and “Stockholm”, then
you are able to scroll through these cities by pressing the - button when the name of the city appears on the dis-
play. (Press the
SET
button until it shows the city's name).
frankfurtM
[
–
]
PARIS
[
–
]
STOCKHOLM
7.3.1.2 Remove a city from the favorites list
• Press and hold the
SET
button for 3 seconds.
LAND EINST.
(COUNTRY in English) appears on the display. Press
the
+
or
–
button to select the country.
• Press the
SET
button to confirm the country.
• Then press the
+
or
–
button to select the city with the
.
• Press the
TEST
button to remove the
. Now this city is removed from the favourites.
• Repeat this if you wish to remove more cities from your list.
• Now, you can also press the
+
or
–
button to select another favourite city.
• Once you have made all your changes, press the
SET
button to quit.
EINST.VORG.
(EXIT in English) appears on
the display. After 4 seconds, it will go to the Date-Time Mode.
7.3.2 Personalize your place name
• Press and hold the
SET
button for 3 seconds.
LAND EINST.
(COUNTRY in English) appears on the display. Press the
+
or
–
button to select the country. If
D/GER
appears, you have selected “Germany”.
• Press the
SET
button to confirm the country. On the display appears
STADT EINST.
(CITY in English).
• Then, press the
+
or
–
button to select the city, and the city's name appears on the display, for instance
frank-
furtM
. You can now enter a new city near Frankfurt am Main.
• Press the
MEM
button; a cursor flashes on the first position of the information window.
Apply the following input commands:
Button
Function
+
or
–
Selection of a letter
01_TFA_No. 35.1156_Anleitung 29.11.2019 6:59 Uhr Seite 14
