When the monitoring of an electrical appliance is complete; simply turn the appliance off; remove the ENERGY CONTROL from
the mains and then remove the appliance from the ENERGY CONTROL.
Notes:
The above illustrations shown assume a daily value of 7.00 (€, £ and etc.) and 7 days per week, 30 days a
month and 12 months a year (to alternate between these displays simply press the “
COST
” key.
“OFL” will be displayed on the LCD should any cost forecasting reading be over the 6-digit display range.
As the price of a kWh unit does not change (unless by the Electricity Company), only the Total Cost display
(actual electricity used per day, month and year) requires resetting once the ENERGY CONTROL has completed a
reading. To reset, press and hold down the
“COST”
key (for approximately 4 seconds) where all values (with the
exception of Tariff - cost per kilowatt hour) will be reset to zero.
EXTRA NOTES:
The electrical appliance connected to the ENERGY CONTROL should always be operated as normal if forecasting of the cost is
a) Cost per day is
b) Cost per month is
c) Cost per year is
d) Total cost is:
18
