21
20
Radio-controlled clock with outdoor and indoor temperature
• The alarm is activated and the alarm symbol appears on the display.
• To deactivate/activate the alarm, press the
UP
button in alarm mode.
• The alarm symbol disappears/appears on the display.
• When the alarm is activated, the alarm starts to ring when the set alarm time is reached. The alarm symbol flashes.
• Press any button (except
SET
) and the alarm will stop.
• Press the
SET
button to activate the snooze function.
• The alarm will be interrupted for about 5 minutes.
• The snooze symbol flashes.
• Press any button to stop the snooze function.
8. Installation
• When placed outdoors, choose a shady and dry place for the transmitter. Direct sunlight may trigger incorrect measure-
ment and continuous humidity damages the electronic components needlessly.
• Before the final installation, make sure that the measured values are transmitted from the transmitter at the desired instal-
lation site to the base station in the living area.
• Do not use the base station in the vicinity of radiators, other sources of heat or in direct sunlight.
• Make sure to avoid the vicinity of any source of interference such as computer screens, TV sets or solid metal objects.
Within solid walls, especially ones with metal parts, the transmission range (max. 100 m) can be reduced considerably.
9. Battery replacement
• As soon as the corresponding battery symbol appears in the display, please change the batteries of the base station or
transmitter
•
Please note:
When the batteries are changed, the contact between the outdoor transmitter and the base station must be
restored – so always restart both devices or start a manual transmitter search.
10. Additional outdoor transmitters
• For having more than one transmitter, select different channels for each transmitter with the
1,2,3
switch. The new trans-
mitter will be received automatically by the base station.
• The outdoor values will be shown on the display of the base station. If you have installed more than one transmitter, press
the
CHANNEL
button to change between the outdoor transmitters (1-3).
• You can also choose an alternating channel display. Press the
CHANNEL
button. After the last registered channel, a circle
symbol will
appear.
• To cancel an unused channel, hold the
CHANNEL
button for 3 seconds. “- -: -” appears on the display.
Radio-controlled clock with outdoor and indoor temperature
11. Troubleshooting
Problem
Solution
No indication on
➜
Ensure the batteries' polarities are correct
the base station or
➜
Change the batteries
the outdoor transmitter
No DCF reception
➜
Activate DCF reception in setting mode (RCC ON)
➜
Start the initialization manually
➜
Wait for an attempt reception during the night
➜
Choose another place for your device
➜
Set the clock manually
No reception of the
➜
No outdoor transmitter is installed
outdoor transmitter
➜
Check the outdoor transmitter's batteries (do not use rechargeable batteries!)
Display "- -, -"
➜
Start manual search for the outdoor transmitter
➜
Choose another place for the transmitter and/or the base station/reduce the distance
Incorrect display on
➜
Change the batteries
the base station or
➜
Base station: Use a pin to press the
RESET
button
the outdoor transmitter
If your device fails to work despite these measures, contact the retailer where you purchased the product.
12. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries with ordinary household waste.
As a consumer, you are required by law to take them to your retail store or to an appropriate collection site
depending on national or local regulations in order to protect the environment.
The symbols for the contained heavy metals are:
Cd=cadmium, Hg=mercury, Pb=lead
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE).
Please do not dispose of this product in ordinary household waste. As a consumer, you are required to take end-
of-life devices to a designated collection point for the disposal of electrical and electronic equipment, in order to
ensure environmentally-compatible disposal.
TFA_No. 60.4521_Anleitung 11.12.2020 9:28 Uhr Seite 11
