Display outdoor temperature :
l
Press “ CHANNEL” button (B2) to view the 3 Channels’ temperature. The
sequence is shown as follow:
Press
Press
Press
“CHANNEL” button
“CHANNEL” button “CHANNEL” button
Display the three
channels alternatively
l
Hold “ CHANNEL” button (B2) for 3 seconds to cancel unused channel manually.
It will automatically register a new channel again if a new channel is received.
If there is no temperature displayed in existing channel ( “
- - . –“
is displayed on
the LCD ), hold “CHANNEL” button (B2) for 3 seconds to cancel that channel
and would receive the channel again ( “Beep” sound can be heard.). Then, press
“ TX “ button (D5) on the thermo sensor unit to transmit signal to the main unit
manually
l
The trend pointer displayed on the LCD indicates the trend of the outdoor
temperature.
“
” indicates the outdoor temperature is increasing.
“
” indicates the outdoor temperature is steady.
“
” indicates the outdoor temperature is decreasing.
l
Press “ °C /°F” button (D3), on the Thermo Sensor unit, to select Thermo Sensor
displayed in Celsius mode or Fahrenheit mode.
l
The Operating temperature range of the Thermo Sensor Unit:
-20°C ~+ 50°C
Temperature Alert function:
l
Hold “ ALERT” button (B5) for 3 seconds to enter Temperature Alert setting,
Temperature’s digits flash.
l
Press “ +” (B7) or “-” (B8) button to select Indoor or Outdoor CH1, CH2 and CH3
temperature alert. Press “ALERT “button to confirm the setting.
l
Press “ +” (B7) or “-” (B8) button to set the upper ”
” and lower “
” limit of
