background image

 

35 

 

LOW OUTDOOR TEMPERATURE ALARM SETTING 

Note: 

Within the LOW outdoor temperature alarm setting there are optional sub-settings which can be 
set individually.  Note:

 The outdoor temperature alarm can only be set for channel 1 

transmitter. 

 

To set the LOW outdoor temperature alarm (default OFF):  

 

I. 

Buzzer ON/OFF (alarm sounding): 

 

1. 

Press the ALM STOP key to set buzzer ON/OFF. The “ 

 “ icon will appear if the 

buzzer alarm is ON. No acoustic alarm signal will be heard when the weather alarm 
is trigged if buzzer is set OFF. 

 

II. 

Set the alarm ON/OFF: 

1. 

Press the MAX/+ or MIN/- key to activate the alarm ON/OFF. 

 

III. 

Set the alarm value (default 0ºC)

 

1. 

Press the SET key to enter the alarm value setting (alarm value flashing) 

2. 

Use the MAX/+ or MIN/- key to set the alarm value. 

3. 

Press the SET key to confirm and enter the 

HIGH indoor temperature alarm 

setting.

 

 

IV. 

If no LOW outdoor temperature setting is needed, please press the ALM DATA key to 
enter the 

HIGH outdoor temperature alarm setting

 

 

HIGH OUTDOOR TEMPERATURE ALARM SETTING 

Note: 

Within the HIGH outdoor temperature alarm setting there are optional sub-settings. Note:

 The 

outdoor temperature alarm can only be set for channel 1 transmitter. 

 

To set the HIGH outdoor temperature alarm (default OFF):  
I. 

Buzzer ON/OFF (alarm sounding): 

 

1. 

Press the ALM STOP key to set buzzer ON/OFF. The “ 

 “ icon will appear if the 

buzzer alarm is ON. No acoustic alarm signal will be heard when the weather alarm 
is trigged if buzzer is set OFF. 

 

II. 

Set the alarm ON/OFF: 

1. 

Press the MAX/+ or MIN/- key to activate the alarm ON/OFF. 

 

III. 

Set the alarm value (default 30ºC)

 

1. 

Press the SET key to enter the alarm value setting (alarm value flashing) 

2. 

Use the MAX/+ or MIN/- key to set the alarm value. 

3. 

Press the SET key to confirm and enter the 

LOW indoor humidity alarm setting.

 

 

IV. 

If no HIGH outdoor temperature setting is needed, please press the ALM DATA key to 
enter the 

LOW indoor humidity alarm setting

 

 

LOW INDOOR HUMIDITY ALARM SETTING 

Note: 

Within the LOW indoor humidity alarm setting there are optional sub-settings.  

 

To set the LOW indoor humidity alarm (default OFF):  

 

I. 

Buzzer ON/OFF (alarm sounding): 

 

1. 

Press the ALM STOP key to set buzzer ON/OFF. The “ 

 “ icon will appear if the 

buzzer alarm is ON. No acoustic alarm signal will be heard when the weather alarm 
is trigged if buzzer is set OFF. 

 

II. 

Set the alarm ON/OFF: 

1. 

Press the MAX/+ or MIN/- key to activate the alarm ON/OFF. 

 

III. 

Set the alarm value (default 20%)

 

1. 

Press the SET key to enter the alarm value setting (alarm value flashing) 

Summary of Contents for IQ-WS 35.1040























Reviews: