42
1.
To toggle between transmitters, press the CH key:
Once to show transmitter 2
Twice to show transmitter 3
Three times to return to transmitter 1
2.
While the outdoor MIN/MAX humidity and temperature date is being displayed, press the
CH key. The display will toggle between the different channels MIN/MAX data.
Note:
For example, when the MIN outdoor temperature data is displayed and the MAX/+ key is
pressed, MAX data outdoor temperature will be displayed. If the MAX outdoor temperature data
is displayed and the MIN/- key is pressed, MIN outdoor data will be displayed.
While MIN/MAX data is displayed, the channel can be changed by pressing the CH key.
TO RESET THE MIN/MAX VALUES TO CURRENT VALUES:
To reset individual indoor and outdoor MIN/MAX values to current values:
1.
Press the MAX/+, MIN/- and CH key to select the desired MIN/MAX value.
2.
Press the SET key to reset the selected value to current value
Note:
To reset all indoor and outdoor MIN/MAX values to current values, press and hold the MAX/+ or
MIN/- key for 3 seconds.
OUTDOOR CHANNEL RE-LEARN MODE
In case the temperature data in a particular outdoor channel often shows “--.-“ due to low battery
level or false reset of a transmitter, that transmitter can be set up again individually or all (if more
than 1 transmitter and the “lost” channel can be re-learned again by entering the channel re-
learn mode.
To re-learn ALL channels:
1.
Press and hold the CH key for 3 seconds (outdoor reception signal will show next to
channel display).
To re-learn the CURRENT selected channel:
1.
Press and hold the SET key while pressing the CH key (outdoor reception signal will
show next to channel display).
Note:
If the SET key is pressed too long, the Intelligent Weather Station will enter the Manual
Setting modes instead.
EL BACK-LIGHT
The EL back-light is automatically switched ON when any keys are pressed. The EL back -light
will be switched on for approximately 15 seconds before automatically switching OFF.
LOW BATTERY INDICATOR
The low battery indicator will be displayed in the LCD when the battery power of the Intelligent
Weather Station is low. It is recommended to replace the batteries in all units on an annual basis
to ensure optimum accuracy of the Intelligent Weather Station.
Note:
After battery change, both the Intelligent Weather Station and the transmitter(s) need to
be reset (see note ”
Setting up
”)
“INTELLIGENT” WEATHER DISPLAY
The “Intelligent” Weather text display located at the last section of the LCD will display the
weather forecast based on data received from channel 1 and the air pressure.
The weather station will automatically display the following information:
•
Minimum temperature of the day
•
Maximum temperature of the day
•
Time frame for the weather forecast
•
Probability of the weather forecast
•
Probability of snowfall
•
Probability of fog
