31
Year
Date Month
LCD CONTRAST SETTING
The LCD contrast can be set within 8 levels, from LCD 1 to LCD8 (default setting is LCD 5):
1.
Press and hold the SET key for around 3 seconds until the digit start flashing.
2.
Use the MAX/+ or MIN/- key to view all levels of contrast.
3.
Select the desired LCD contrast. Confirm with the SET key and enter in the
12/24 Time
Display setting
.
12/24 HOUR TIME DISPLAY SETTING:
The time display can be set to view time as 12/24 hour format. The default time display mode is
“24h”. To set to “12h” time display:
1.
Use the MAX/+ or MIN/- key to toggle the value.
2.
Confirm with the SET key and enter the
Time Zone setting
.
TIME ZONE SETTING
The time zone can be set ±12 hour. The default time zone is set to “ 0h”. To set a different time
zone:
1.
The current time zone value starts flashing.
2.
Use the MAX/+ or MIN/- key to set the time zone. The MAX/+ key increases the value and
the MIN/- key decreases the value in consecutive 1 hour intervals.
3.
Confirm with the SET key and enter the
Manual Time setting
.
MANUAL TIME SETTING:
In case the Weather Station cannot detect the DCF-signal (for example due to disturbances,
transmitting distance, etc.), the time can be manually set. The clock will then work as a normal
Quartz clock.
1.
The hour digit will start flashing.
2.
Use the MAX/+ or MIN/- key to set the hour.
3.
Press again the SET key to switch to the minutes. The minute digits start flashing.
4.
Use the MAX/+ or MIN/- key to set the minutes.
5.
Confirm with the SET key and enter the
Calendar setting
.
Note:
The unit will still try to receive the signal between 2:00 and 6:00 am every day despite it being
manually set, if the DCF reception function has been set ON. When it does receive the signal, it
will change the manually set time into the received time. During reception attempts the DCF
tower icon will flash. If reception has been unsuccessful, then the DCF tower icon will not appear
but reception will still be attempted the following hour.
CALENDAR SETTING:
Last digit flashing
Digit flashing
Minutes
flashing
Hour flashing
Digit flashing
Note:
Date, Month, Year (for 24h display)
Month, Date, Year (for 12h display)
