32
The date default of the Weather Station is 1. 1. in the year 2004. Once the radio-controlled time
signals are received, the date is automatically updated. However, if the signals are not received,
the date can also be set manually.
1.
The year starts flashing.
2.
Use the MAX/+ or MIN/- key to set the year. The range runs from 2004 to 2030.
3.
Press the SET key again to confirm and to enter the month setting. The month starts
flashing.
4.
Use the MAX/+ or MIN/- key to set the month.
5.
Press the SET key again to confirm and to enter the date setting mode. The date starts
flashing.
6.
Use the MAX/+ or MIN/- key to set the date.
7.
Confirm all calendar settings with the SET key and enter the
DCF Time Reception
ON/OFF setting.
DCF TIME RECEPTION ON/OFF SETTING
In area where reception of the DCF time is not possible, the DCF time reception function can be
turned OFF. The clock will then work as a normal Quartz clock. (Default setting is ON).
1.
The digit “ON” will start flashing on the LCD.
2.
Use the MAX/+ or MIN/- key to turn OFF the time reception function.
3.
Confirm with the SET key and enter the
ºC/ºF Temperature Unit setting
.
Note:
If the DCF time reception function is turned OFF manually, the clock will not perform any
reception of the DCF time as long as the DCF OFF function is activated.
The DCF reception icon will not be displayed on the LCD.
°C/°F TEMPERATURE UNIT SETTING
The temperature display can be selected to show temperature data in °C or °F. (default °C)
1.
Use the MAX/+ or MIN/- key to toggle between “°C” or “°F”.
2.
Confirm with the SET key and enter the
Air Pressure Unit setting
.
RELATIVE AIR PRESSURE UNIT SETTING
The relative air pressure unit can be set in hPa, inHg or mmHg unit. (default unit is in hPa).
1.
Use the MAX/+ or MIN/- key to toggle between “hPa”, “inHg” or “mmHg”
2.
Confirm with the SET key and enter the
Relative Pressure Value setting
.
Note
:
The default reference pressure value of the barometer is 1013 hPa.
For an exact
measurement it is necessary to first adjust the barometer to your local relative air
pressure (related to elevation above sea level)
. Ask for the present atmospheric pressure of
your home area (Local weather service, www, optician, calibrated instruments in public
buildings, airport).
RELATIVE PRESSURE VALUE SETTING
The default relative pressure value is 1013 hPa (29.91 inHg). This corresponds to the average
air pressure. Pressure below this is referred to as low-pressure area (weather to become
Flashing
Flashing
Flashing
