26
Also the value that triggered the alarm is marked in this Alarm
Event data set.
The AlarmEvent data sets are recorded in addition to the
normal data sets and are automatically listed in the history of
normal data sets.
Note:
The AlarmEvent data records can be displayed in the history mode on
the KlimaLogg Base.
HISTORY MODE:
You also have the option to read the data sets and the AlarmEvent data
sets on the KlimaLogg Base itself.
Press HIST button in normal mode.
HIST appears in the display.
The memory indication is hidden.
The values of the latest data set as well as the time and date
when this data set was recorded will be shown.
Use the button as follows to navigate in history mode:
„HIST “ --------------------next / older record
„OK/MAX/MIN“ -------- -previous / recent record
„ALM“ ----------------------separation of the Alarm Event- data sets
„SET“ --------------------- Back to normal mode
To enter the latest AlarmEvent data set, please press ALM
button in HISTORY-MODE.
The value that triggered the alarm and the corresponding
upper or lower limit are also shown.
With the HIST or OK/MAX/MIN button you can toggle through
the different Alarm Event-records (if available).
If you press the “ALM” button again, you return to the position
of the last showing Alarm Event data set in the normal
HISTORY MODE.
Press and hold the “HIST” or “OK/MAX/MIN” button for fast
forward scrolling through the data sets (steps of 50).
To enter normal mode again, press either SET button in
HISTORY-MODE or press no button for at least 2 minutes
.
