27
RECORD:
A ring memory is used. That means that when all data sets have been written,
the oldest existing data sets are automatically overwritten by the next new data
set. On the memory indication, the logger displays the amount of data sets (in
percentage).
Press and hold the RESET button in normal mode for three seconds to clear
the record.
TROUBLESHOOTING:
If problems occur, we recommend that you read the corresponding
section of the instruction manual in order to become familiar with the
precise function and principle of operation of the device.
Logger:
When the logger malfunctions, check the batteries and reboot the device
if necessary.
We recommend that you allow the KlimaLogg Base to rest for several
minutes and then insert the batteries again.
Do not use rechargeable batteries. 1.5 V batteries should be used for
proper function of the KlimaLogg Base.
POSITIONING OF THE LOGGER
The KlimaLogg Base can be placed on a table or mounted on a wall.
Before mounting it on a wall, ensure that any transmitters in use can be
correctly received at the desired mounting location.
1.
Attach an appropriate screw (not included in
the scope of delivery) to the wall and
ensure that its head is approx. 5 mm from
the wall.
2.
Fold i
n the logger’s table stand and hang it
on the screw using the eyelet on its back.
Ensure that the device is securely engaged
with the screw before letting go.
CARE AND MAINTENANCE
Clean the instrument and the transmitter with a soft damp cloth. Do
not use solvents or scouring agents. Protect from moisture.