Teleport Integration Unit. Configuration Manual
19
Network settings
In the network settings of the integration unit, you should specify a unique IP
address within the subnet. Let's say, the IP of Teleport-1 is 192.168.0.1, and the IP of
Teleport-2 is 192.168.0.2. Change these fields as shown in Figure 5.3.1.4. To do that,
select
Basic Settings → Network Settings
in the side menu
Figure 5.3.1.4. Network settings of Teleport-1
List of remote devices
To make Teleport-1 visible to Teleport-2, and Teleport-2 visible to Teleport-1,
you should introduce them to each other. To do that, each unit has a list of remote
devices. It stores all the devices that a local device can interact with.
Let's take Teleport-1 as an example. For it, the remote device is Teleport-2.
Therefore, go to Teleport-1 web interface, tab
Teleport Settings → Remote
Devices
. As we see, the list is empty yet. Add Teleport-2 to the list indicating its IP
address, type (Teleport-2) and a user-defined description to ease the identification.
Press
Apply
.
Figure 5.3.1.5 Configuration of remote devices of Teleport-1
As we see in Figure 5.3.1.6, Teleport-2 has been added to the list.
