15
7.
Shift Holder
Screw the shift holder into the shift axle (
A
)
with appropriate depth, and tighten the nut
(
B
) under on the axle.
8.
Front Bumper
Take off the 4 bolts and washers on the
front lower shield (
A
), and assemble back
with front bumper. For easy assembly,
please fix the lower 2 bolts first, and then
fix the upper bolts.
9.
Rear Hand Hold
Take off the bolts (
A
) of the left and right
side rear bumper brackets (
B
), and
assemble back with the rear hand hold (
C
),
the hand hold have to be fixed between the
frame and the rear bumper brackets.
10.
Rear Carrier
Make the front support tube of the rear
carrier through the 2 holes on the top of
rear vehicle plastic fender. And bolted to
the mounting points of frame (
A
) and to the
rear hand hold (
B
). For ease of operation,
seat back cushion (
C
) and passenger hand
holder (
D
) can be pre-assembled before the
rear carrier being fitted to the vehicle.
Caution
When install the passenger hand holder,
make the high end forward to front to get
better comfort.
B
A
A
A
B
C
A
B
C
D
