To this chapter contents
6. CYLINDER HEAD/VALVE
Install cam chain on to sprocket and align the
timing mark on the sprocket with that of cylinder
head.
Align sprocket bolt hole with camshaft bolt hole.
Tighten the sprocket mounting bolts.
Caution
Make sure timing marks are matched.
2 bolts
Timing mark
Install cylinder head side cover (3 bolts).
Install thermostat (2 bolts).
3 bolts
Thermostat bolts
Loosen auto tensioner adjustment bolt and
remove bolt and spring.
Install tensioner and install spring and adjustment
bolt.
Tensioner adjustment bolt
Install cylinder cover (4 bolts).
4 bolts
6-15
PDF created with pdfFactory Pro trial version
www.pdffactory.com