10
Set Scanning Buttons
Here you can set which button(s) you would like to use
when reading a tag or requesting a weight.
Tap 'Set Key for Scanning' and then press one of the 3
scanning buttons on the front/side of the Psion.
You can set more than one if you wish.
If you are connected to a Weigh Scale, the 'Set Key to Get
Weight' button can be the same or different
from the Scanning Key.
Set Weigh Scale Type
Choose the appropriate Weigher Type from the available
options.
Set Read Mode
The 4 options for read mode are:
1) Read on button press
2) Continuous - every 2 seconds (Tick duplicate tag choice
below)
3) External Bluetooth Source (If you are connected to a
fixed panel or Bluetooth wand reader)
4) Get weights automatically by Bluetooth (If you are
using an External Source and you want to receive weights
without pressing any buttons)