R
epair
P 5 / 7
Fig. 14
[3] -7. Disassembling Dust Case
See
Fig. 13
when replacing Heat resisting glass and Punching metal cover. (
Fig. 9
)
Fig. 13
[4] ADJUSTMENT
Heat resisting glass
Punching metal cover
Dust case cover
Dust plate
Tapping screws 4x18 (4pcs)
Dust case
[4] -1. Hinge Portion of Gear Housing (Blade Case)
Fasten Gear housing (blade case) to Base so that cutting depth can be adjusted smoothly without wobbling.
(Refer to "1. Replacement of Base" and
Fig. 1
on page 2)
[4] -2. Lever Plate of Cutting Depth Lock Lever
Fix Lock plate to Lock lever so that the line
through Cap square neck bolt M6x20 and
Pan head screw M4x8 forms an angle of
approximately 10 to 30 degrees to the horizontal
axis when the lever is locked. (
Fig. 14
)
approx.
10 to 30 degrees
Cap square neck
bolt M6x20
Lock plate
Lock lever
Pan head screw M4x8
