Page 4/10
2) Transport-lock main bearing
The main bearing of the TTT-Compact II is locked during transport to prevent damages to the
bearing caused by vibration. This locking mechanism lifts the sub-platter slightly and keeps it in
position. To release the transport lock, please follow the following steps:
1.
Release 4x hexagon-screw (1)
2.
Remove 4x hexagon-screw (1) completely
3.
Move both locking-cylinders (3) out of the sub-platter (2)
4.
Turn both locking cylinders 180° around their axle
5.
Reinsert 4x hexagon-screw and tighten them
6.
Sub-platter incl. belt and flywheel shall be free turning now
3
180°
180°
1
3mm
2
Summary of Contents for TTT-Compact II
Page 2: ...Page 2 10 ...
