background image

24

?

!

 

CHECK IT OUT

Larger hydraulic systems are controlled 

with special computers. A sophisticated 

program evaluates signals coming from 

the various sensors in the system and 

activates valves and electric motors at the 

right moments.

Pneumatics 
and hydraulics

Pneumatic and hydraulic systems are 
used in many different types of modern-
day machines. They are used when 
power must be transferred from one 
location to another. Both systems have 
specific advantages and disadvantages 
and are used depending on the 
application. 

PneuMatic

 systeMs 

Work with coMpressed air, generated b

coMpressors. Electrically controlled

  

valves direct the 

coMpressed air 

into 

cylinders with pistons in theM. The p

istons 

then perforM the desired MoveMents.

 

however, these systeMs cannot exert

 

excessive forces, since air can be 

coMpressed. The advantage of 

pneuMatics

 

is that very 

high operating speeds

 

can be achieved and 

coMpressed air

 

can be controlled very easily.  

If very large forces have to be transmitted, 
hydraulic systems are usually used. These 
also work with cylinders, pistons, and valves, 
like in the mega cyborg hand, but they 
mostly use special hydraulic oils as a 
medium, instead of water, because these oils 
can be put under high pressures. Such 
systems can be found in excavators, some 
elevators, numerous commercial vehicles,  
and in the braking systems in cars. 

I have 

hydraulic 

systems on 

board.

Hydraulics

Computer Control

Summary of Contents for Mega Cyborg Hand

























































Reviews: