10. Warning
a) If the cell is found to deform or become hot, you should stop using and seek help
from our company or repair department.
b) In case of fire, do not quench the fire directly using water. It is recommended to
quench it using sand, foam extinguisher or thick clothing soaked with water.
c) For the cell fault caused by delayed charging fully-discharged cell, warranty will
not be provided.
d) Do not discard the cell haphazardly.
Check, cleaning and maintenance
1. Check the whole scooter at a safe place.
2. Check whether the abnormal part found the day before impacted running.
3. Braking effect of the brake: check whether the braking handle can be holding and pinching
gently and whether the clearance is appropriate. Check whether it can brake scooter
normally.
4. Check whether there are chaps, damage or abnormal wear on tyres or whether there are
such sharp objects as metal, pebble, glass embedded in tyres. If the lug on a tyre has been
worn off by 213, replace the tyre. Check tyres' air pressure according to sunken condition
of the part of tyres contacted with ground. The normal air pressure of front and rear tyre
is 1.5kg/cm2.
5. Check whether the power supply's voltage indicator indicates full .
6. Steering system: swing the handle and front fork upwards, downwards, forwards,
backwards, leftwards and rightwards to check whether tightness is suitable and steering is
flexible, and whether there are such problems as abnormal sound caused by collision,
steering system loosening, collision sound. If there are, please contact the distributor, so
as to provide perfect after-sale service for you.
7. Check whether the front and rear wheel shaft become loose.
Summary of Contents for EBIKE
Page 1: ...THAMLEV EBIKE MANUAL...
