background image

39

4

11. This appliance is not intended for use by children or persons 
 

with reduced physical, sensory or mental capabilities, or lack of 

 

experience and knowledge, unless they have been given supervision

 

or instruction concerning the use of the appliance by a person 

 

responsible for their safety.

12. Children should be supervised to ensure that they do not play with 
 

the appliance.

13. Avoid contact with moving parts.

14. Keep hands and utensils out of the container while operating the  
      appliance  to reduce the risk of severe injury to persons or damage             
      to the blades. A scraper may be used but only when the appliance  
      is not running.

15. The appliance cannot be used for processing hard substances, 
 

otherwise the blade could be blunted.

16. Be sure the bowl lid is securely locked in place before operating 
 

the appliance.

17. The use of an accessory not recommended or sold by the 
 

manufacturer may cause electric shock or injuries to persons.

18. Do not operate the appliance for anything other than its intended use.

19. Never insert food by hand. Always use food pusher.

20. Before removing the motor appliance from the bowl, switch off the   
      appliance, wait until the blades have come to a complete stop and  
 

then remove the motor appliance.

21. Do not use fingers to scrape food away from the blade while 
 

the appliance is operating. This may result in injury.

IMPORTANT SAFEGUARDS

 - 

continued

   

          Always be sure that the motor appliance is unplugged 

and removed from any attachment before cleaning.

   

          Blades and discs are very sharp, handle with care.

1. Motor appliance: 

Wipe the motor 

appliance with a damp cloth and dry 
thoroughly.

   

          Do not wash the 

motor appliance under running 
water, or immerse it into any  
liquid. Fig. 1a.
DO NOT PUT IN DISHWASHER.
2. Detachable shaft: 

Wash the 

detachable shaft under running 
water without the use of abrasive 
cleaners or detergents. Fig. 2a.

DO NOT PUT IN DISHWASHER.
NOTE: 

Do not immerse the 

detachable stem in water as the 
lubrication on the bearings may wash 
away. After cleaning the detachable 
shaft place it upright so that any 
remaining water can drain out.

3. Blades and Disc Blade: 

Wash 

the blades and Disc Blade in soapy 
water, rinse and let it dry. Fig. 3a

DO NOT PUT IN DISHWASHER.
NOTE: 

Some food may discolor the 

Disc Blade. This is normal and will 
not harm the plastic or affect the 
flavor of food. Rub with cloth dipped 
within vegetable oil to remove discol-
oration.

ClEANING AND MAINTENANCE

!

CAUTION

!

CAUTION

!

CAUTION

FIG. 1a

FIG. 2a

FIG. 3a

Summary of Contents for Thunder Stick FP9017-A
























Reviews: