1. Push the rear back rail onto one of the
base end panels, ensure the fittings face the
rear of the bed.
2. Secure rail, see detail
3. Repeat with second base end
panel
a, drop the Bed Connector (
BF107) in to the hole on the top of
the post
b, secure with M6 x 25 mm bolt
(B625) FINGER TIGHT only
Insert Barrel Nut (BF101) into hole on inner
surface of the rail, keep the slot horizontal -
then secure with M6 x 90 Bolt (B690)
5
Jango Hi Sleeper
(v June 2015)
Assemble the base
B690
M6 x 90mm
2 pieces
BF101
Barrel Nut
2 pieces
B625
M6 x 25mm
4 pieces
BF107
10 x 64mm
4 pieces
Insert all 4 Bed Connectors
