1. Screw the Steel dowels (C104) into the 5
mm holes in the posts of the Bed head and
foot boards.
NB THE HEADBOARD HAS 5 MM HOLES
ON BOTH POSTS, THE FOOT BOARD
(LADDER END OF THE BED) HAS 5 MM
HOLES ON ONE POST ONLY.
1. Place the foot board on the right hand
end of the bed base - do not secure to the
base yet
2. Check you have the back rail (it has 2
holes in the centre of the face surface) and
push on to the footboard
3. Add the 2 long guard rails, ensure the
fittings are facing to the rear of the bed - you
will 2 people for this stage.
4. Carefully place the Headboard into
position, align all 3 rails and push the bed
together
5. Finally secure to rail to the bed head and
foot boards using the barrel nuts (BF101)
and 2 bolts M6 x90 (B690)
6
Jango Hi Sleeper
(v June 2015)
Prepare the top Bed head and
footboards.
C104
Steel dowels
12 pieces
Build the Top Bed
B690
M6 x 90mm
2 pieces
BF101
Barrel Nut
2 pieces
