Linea
Media
Stand
Assembly Instructions
Please read all of the information below before you begin.
Thank you for purchasing the Linea Media Stand. The contents
included in the box are located below and on the next page. Please
take the time to identify the hardware and media stand components.
As you unpack and prepare for assembly, place the contents on a
carpeted or padded surface to protect them from damage.
Required Assembly Tools
Hammer or
Mallet
Phillips Screwdriver
WARNING
—
Severe injury may occur if furniture tips over. Never allow children to climb or play on this product. Place heavier items on lower shelves
as far back as possible and never overload. Follow all instructions listed in this assembly guide and always use the anti-tip hardware to mount unit to a wall.
You will need both Phillips and flathead screwdrivers. Use a mallet/hammer to tap the dowels into place.
©2013 The Container Store
®
Inc. All rights reserved. 18023 3/13
Hardware
(H1) x 12+1 extra wooden dowel
(H2) x 18+1 extra cam bolt
(H3) x 18+1 extra cam lock
(H4) x 8+1 extra bolt
(H5) x 1
Allen wrench
(H6) x 3
corner bracket
(H1)
(H3)
(H4)
(H2)
(H5)
(H6)
Flathead Screwdriver
