E
ng
lis
h
10
get ready for
thefirstyears.com
TM
get ready for
thefirstyears.com
TM
11
Memory Pump
Install battery and charge pump
1. • Turn Memory Pump unit
over to back side
• Insert coin into lock.
2. • Turn coin counterclockwise
• Slide the battery door to
the left.
5. Secure battery pack into
compartment first and
then lay wire down.
6. Align battery door with
4 slots and slide door
into place.
9. When pump is charged press
the “Power” button.
1 Power on button 2 AC adapter input
3 Air tubing plug in 4 Reset button
Set up: Using a paper clip insert end into reset area
located below Memory Pump screen and press.
8. Plug adapter into
pump unit to
charge.
4. Snap rechargeable
battery pack
connector together.
7. Insert coin into lock
and turn clockwise .
3. Lift battery door off
to expose rechargeable
battery.
Charging the pump for 2.5 hours provides four 15 minute pump sessions.
NOTED: You can begin pumping WITHOUT performing the SET UP MODE.
(Remove plastic cover prior to use.)
SET UP Mode
Pump Diagram
1
3
2
4
