3
ASSEMBLY
CLEAN all parts before use. See “Breast Pump Care” for instruc
tions.
1) Insert valve into the bottom of the 3 way
adapter. Firmly press valve into place.
2) Screw bottle into adapter.
Do not attempt to remove the soft rubber piece attached to the hard valve, as this may damage theunit.
3) Press Flexi-Fit™ Shield on to 3-way
adapter.
4) Attach double end of hose to pump.
5) Attach one single hose end to each of
the 3-way adapters.
6) Plug AC adapter into
side of pump as shown.
Plug AC adapter into outlet.
6a) OR Plug pump into
cradle and then plug
AC adapter into pump
cradle as shown.
Plug AC adapter into
outlet.
soft rubber
piece of
valve
