EN
Digital spirit level -
with LCD screen, sound signal
A digital spirit level that is easy and simple to use. The LCD display has a backlight, so you can work even in dark or in low light conditions. The display - after a single
calibration - shows how many degrees and in which direction we deviated from the water level.When measured upside down, the characters on the display would rotate,
ensuring readability. Accurate measurement can also be aided by sound effects: the closer we are to the horizontal plane, the more beeping we can hear. (Continuous beep
sounds at water level). The spirit level is equipped with 2 electronically calibrated spirit vials. It is made of quality, durable plastic housing with soft rubber end stops. The
tool is a full-length scaled ruler that can be useful for any measurement. The rubberized handle helps to hold it in any position. It can be an ideal area of use on construction
sites, renovations, with the help of which there will certainly be no more inclined planes and surfaces.
• LCD screen with backlight
• Value keeping function
• Sound signal(can be switched on by pressing and holding the „MODE” button)
• Can be used for both relative and absolute measurements (you can switch between them by pressing the „ZERO” key and then the „ON / OFF” key)
• Power saving battery operation
• Magnetic housing for easy work
• Rubberized, non-slip handle
• 2 glass vials (vertical, horizontal)
• Hangerhole
Power supply:
1 x AAA 1,5 V battery (Not included)
Screen type:
LCD
Background lighting color:
Green
Size:
600 x 58 x 28 mm
Degrees displayed:
Two decimal characters
Material:
Plastic
Material width:
1,1 mm
Number of vials:
2
Accuracy:
0,5 mm / m
Protection:
IP20
Calibration guide
To calibrate, place the spirit level on a horizontal surface. To determine this, use the spirit level at the top.
Turn on the digital part of the unit and briefly press the
“MODE”
and
“ON/OFF”
buttons at the same time.
- 1 -
appears on the display, then press the
„ON/OFF”
switch
briefly and do not move the device. A flashing
- 1 -
indicates that calibration is in progress. If
- 2 -
is displayed, please turn the spirit level 180 degrees horizontally and
press the
“ON/OFF”
button again briefly.
- 2 -
indicates that the spirit level is again being calibratedWhen the flashing stops, the calibration of the tool is successful. You
can use the digital part for precision measurements.
Measurement to reference point
Allows measurement for a specific plane. May be suitable for measuring inclined planes. You can lock the position of the spirit level by pressing the
“ZERO”
button. From
now on, the value shown on the display does not show the deviation from the water level, but the deviation from the given plane.
„REF”
appears on the display. To switch
off the measurement from the reference point, press the
„ON/OFF”
button.
Backlight
To switch on or off, press and hold the button marked
„HOLD”
.
Record the measured value on the display
If you do not want the measured value to change after moving the tool after the measurement, briefly press the
„HOLD”
key. The tool then records the measured value
on the display.
To turn on the alarm
You can turn on the audio tool feedback by holding down the
“MODE”
button. As you approach the horizontal plane, you will hear an increasingly dense sound. At water
level, the sound is continuous. Thanks to the audio feedback, it is not necessary to read the measured value from the display or the spirit level, you will know when the
device is level.
Unit change
If you want to use a percentage deviation instead of a degree measurement, please briefly press the
„MODE”
button. You can switch back by pressing the button again.
