The Handy 193820003 Instruction Manual Download

Page: 6 / 24

GENERAL SAFETY INSTRUCTIONS

Read and understand the owner’s manual and labels affixed to the

product. Learn its application and

limitations as well as the specific potential hazards. Retain these instructions for future reference. The operator
is responsible for following the warnings & instructions in this manual and on the product.

Read & understand operator’s

manual before using the machine.

Failure to follow instructions could

result in death or serious injury.

Please keep in a safe place for

future reference.

Whenever the machine is in use, eye

protection must be worn to safeguard

against flying objects.

Hearing protection must also be used

to protect the operators hearing.

Keep all bystanders & animals away

from the machine during operation.

If approached, stop the machine

immediately.

Always wear gloves to protect your

hands.

SHARP ROTATING TINES

Risk of Carbon Monoxide Poisoning.

Ensure working area is correctly

ventilated.

Wear foot protection or sensible shoes

when using the machine

Fire Risk

Fire and its vapors are extremely

flammable & explosive. Fire or

explosion can cause severe burns or

death.

Do not expose to rain or damp

conditions.

No smoking

Do not use near a flame, or sparks

Hot Surface.

Running engines produce heat.

Engine parts, especially the exhaust,

become extremely hot. Severe

thermal burns can occur on contact

Moving Parts

Rotating parts can contact or entangle

hands, feet, hair, clothing or

accessories.

Traumatic amputation or severe

laceration can result

Keep guards in place and in working

order. Replace damaged, missing or

failed parts before using it.

Safety alert symbol. Used to alert you

to potential personal injury hazards.

Obey all safety messages that follow

this symbol to avoid possible injury.

DANGER

Indicates an imminently hazardous
situation which, if not avoided, will

result in serious injury

WARNING

Indicates a potentially hazardous

situation which, if not avoided, could

result in serious injury

CAUTION

Indicates a potentially hazardous

situation which, if not avoided, may

result in minor or moderate injury.

CAUTION

Used without the safety alert symbol

indicates a potentially hazardous

situation which, if not avoided, may

result in property damage.

CE & UKCA Marking - the product

meets demand and regulations set

by the EU & UK

Noise Level - See label on machine

Summary of Contents for 193820003

























Search results

Summary of Contents for 193820003

Reviews:

Related manuals for 193820003

Brands by name

Popular brands

The Handy 193820003, Instruction Manual

Search results

Summary of Contents for 193820003

Reviews:

Related manuals for 193820003

Brands by name

Popular brands