background image

 
 

 

GENERAL SAFETY INSTRUCTIONS 

It is impo

rtant that you read and understand the owner’s manual and labels affixed to the

 machine. 

Learn its application and limitations as well as the specific potential hazards. Retain these 
instructions for future reference. The operator is responsible for following the warnings & 
instructions in this manual and on the product. 

 

A.

 

CAUTION - 

Read & understand operator’s manual before using the machine. Failure to 

follow instructions could result in death or serious injury. 

B.

 

CAUTION - Whenever the machine is in use, safety glasses must be worn to safeguard 
against flying objects. We also recommend the use of ear protection. 

C.

 

DANGER - Keep hands & feet away from the rotating tines. 

D.

 

Keep all bystanders & animals at least 10 metres away from the machine during operation. If 
approached, stop the machine immediately. 

E.

 

DO NOT use the machine in wet weather conditions. 

F.

 

CAUTION - Stop the machine immediately if the power cable or plug becomes damaged. 

G.

 

Disconnect from power supply when not in use, before moving, adjusting, changing parts, 
cleaning, or working on the machine. Never open the motor cover before disconnecting the 
electrical plug from the power supply. 

 

Safety alert symbol. Used to alert you to potential personal injury hazards. Obey all safety messages that 
follow this symbol to avoid possible injury. 

DANGER

 

Indicates an imminently hazardous situation which, if not avoided, will result in serious injury.  

WARNING

 

Indicates a potentially hazardous situation which, if not avoided, could result in serious injury 

CAUTION

 

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. 

 
CAUTION 

Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, 
may result in property damage

 

Summary of Contents for 193855002





















Reviews: