Page 7
ASSEMBLY, cont’d
Attaching the Metal Blade:
•
Lay the brushcutter on its back.
•
Insert the allen key (7) into the gear shaft, line up the holes
in the blade holder and
the
cover to stop the shaft turning.
•
Place the blade onto the upper blade holder (5) and centre.
• Place washer (3), then lower blade holder (2) and finally
the nut (1). Screw in an
anti-clockwise
direction and
tighten using the
box
spanner.
•
Release the allen key.
Note: to undo the nut to change the blade, turn clockwise.
Attaching the Line Trimmer Head:
•
Lay the brushcutter on its back.
•
Insert the allen key into the gear shaft as before to stop the
shaft turning.
•
Remove
the
washer (3 in pic above) but leave washer (5)
on
the shaft.
•
Screw the nylon head (3)
anti
-
clockwise
onto the
thread
ed shaft (2) and tighten manually.
•
Release the allen key.
Note: to remove the trimmer head, turn clockwise
.
Summary of Contents for THBC43
Page 12: ...Page 12 PARTS DIAGRAM DRIVE UNIT ...
Page 14: ...Page 14 PARTS DIAGRAM ENGINE ...
