HANDLE ASSEMBLY
1.
Assemble the upper handle (2) to the lower handle (4) with the knob (16), washer (15) and bolt
(14). (See Fig. 5).
2.
Plug the two lower handle tubes in the main body holes. (See Fig. 4).
3.
Install two lock screws and washers (18 & 19), ensure the handle tube is locked into the mower
body. (See Fig. 4).
COLLECTION BOX ASSEMBLY
1.
First, attach the carry handle to the collection box top.
2.
Insert the hook, into the box top.
3.
Apply downward pressure to the other end of the handle, until a click is heard and the handle
fully located.
4.
Connect the first two hooks at the end of the collector: Align the hole in the top box with the
hook in the lower box. Insert the hook through the hole and press it until the hook clicks into
position. (fig. 14)
