Page 8
ASSEMBLY
Modern production techniques mean that there is very little likelihood of there
being any parts missing in the carton supplied. However please check the box
carefully before commencing any assembly.
If you are missing any parts please
call our spares helpline: 01793-333212.
Contents:
Power Unit
; Spark Plug Wrench; Carry Strap.
Hedgetrimmer Cutting Head; Adjusting Bracket; Screw
x2
; Flat Washer
x2
;
Spring
Washer x2;
Locking Knob.
Brushcutter Head; Metal Guard; Allen Key; Cutting Blade; Blade Retaining Nut; Flange
Washer;
Clamp Washer;
Cupped Washer.
Pruner
Cutting Head; Chain Bar Cover; Chain Bar; Chain; Special Spanner.
Line Trimmer Head; Shield Kit
.
Barrier Handle (two sections) with 4 screws and nuts.
Assembling the Loop Handle:
•
Disassemble the loop handle.
•
Position the upper handle over the upper shaft just in front of
the fixed rubber grip. The lower handle locates on the under
-
side of the shaft and should line up with the four screw holes
on the upper handle. Secure with four screws, washers and
nuts.
Nuts are usually already fitted in the lower handle.
Washers should be located under the screw heads.
Attaching the Shoulder Harness:
•
Connect the latch on the shoulder harness to the harness
loop
,
located on the upper shaft.
•
Adjust the strap
length
to a co
m
fortable position
, making sure that
any excess strap is secure
.
Fitting the Attachments:
•
The attachments connect to the power unit by means of a coupler device.
•
Loosen the
rotating
knob on the coupler of the
power unit
shaft.
•
Push in the button on the
attachment
shaft.
•
Align the button with the guide recess on the coupler and slide the two shafts together
to connect the slot and socket inside the shafts
.
•
Rotate the
attachment
shaft until the button locks in the positioning hole.
•
Tighten the
rotating
knob securely.
Note: If the button does not release completely in the positioning hole, the shafts
are not locked in place. Slightly rotate from side to side until the button locks.
Summary of Contents for THMC
Page 5: ...Page 6 MAJOR PARTS ...
