2013-04-03
3
ASSEMBLY:
Place log splitter horizontal or vertical on floor in a clear and level area. Refer to the parts list for
the following steps:
Step 1: Attach The Handles
Attach handles (part #8) to the top of the log splitter. One handle on each side. Secure each
handle using a Lock Washer Ø10 (part #20) and M10 Hex Nut (part #21).
Step 2: Attach The Hydraulic Pump
Assemble the hydraulic pump (part #12) to the base by using two inner hex screws M8x16 (part
#14). Note you should use an inner hex wrench to assemble this pump.
