6
5. ACCESSORIES
The brush cutter is packed in two separate cartons: one for the engine and another for the drive shaft attachment.
The engine carton contains the following. Please check the contents.
Model X800
Engine Kawasaki
TJ45E
Cutting attachment
Nylon line cutter, Tap & Go, M10 x 0.25 Left handed nut
Handle
Ergonomic handle type (Ø 19 mm)
Safety Guard
CE Standard
Bracket spacer
Double shoulder harness
Mounting screws
Screw Socket M6 x 30 mm
Screw wrench 17 x 19 mm
Spanner 8 x 10 mm
Standard tools
Allen wrench 4mm-5mm
6. EXPLANATION OF TERMS
1
Brush cutter
The trimmer with a blade, for cutting weeds, shrubs and bushes.
2 Grass
trimmer
The trimmer with a grass trimmer head, for cutting weeds, grass and
similar soft shrubs.
3
Cutting attachment
General terms for blade and grass trimmer heads.
4 Idling
Minimum stable speed with the carburetor adjusted to the manufacturers
specifications.
5
Throttle lock
Locks the throttle at half revs.
6
Quick release mechanism
Device to allow the operator to halt operation and disengage the trimmer in
an emergency.
7
Throttle trigger lock out
Device to prevent the throttle trigger from accidental activation before it is
released manually.
7. ATTACHMENT SETUP
7-1. Attach the Engine to the shaft tube
1. Put the engine and shaft tube on the ground and then assemble as shown in Fig.1.
2. Lock the M6x30 screws tight to prevent them coming loose during operation.
Fig.1 Fig.2 Fig.3
7-2. Double- hand handles
1. Insert both handles into Handle Joint A evenly as in Fig.2.
2. Adjust the handle joint to the most comfortable position for the user.
3. Adjust the handle to a suitable angle.
4. Lock bolts tight.
7-3. Cutting attachment guard mounting
1.
Join the two parts of the cutter guard by clicking them together. Lock them in position by inserting the screw provided.
2.
Fit the guard assembly to the drive shaft housing using brackets, screws and nuts as in Fig 3.
Summary of Contents for THPK45CH
Page 12: ...12 MAINTENANCE RECORD ...
Page 13: ...13 12 PARTS DIAGRAM AND LISTS ...
