5
Operating Instructions and Parts List
Installation Procedures
This filter should only be installed
by qualified personnel.
EQUIPMENT INSPECTION
Carefully inspect equipment before
installing. Occasionally, products are
damaged in transit. Any damaged
filter components can cause failure and
should be replaced immediately.
1.
The filter system should be
installed
on a level concrete slab or
other rigid
base. Select a well
drained and
vented area, one that
does not flood
when it rains.
Position the filter so that
the piping
connections, and winter
drain are
convenient and accessible
for
operation, service, maintenance
and winterizing.
2.
Position filter body such that all
operation and safety labels are
visible.
3.
Position filter so the filter will drain
by
gravity.
4. If practical, place pump and filter in
the shade to shield it from
continuous, direct heat from the
sun.
5. Connect the pool suction plumbing
between the skimmer, pool suction
outlet (from the pool) and the
pump.
Connect the pump discharge
(pump OUTLET) to the filter
INLET.
6
.
7
.
Connect the bottom filter port
(filter OUTLET) to the pool
return plumbing lines.
Do not locate pump controls over
or near filter.
Verify water discharge from the
manual air relief valve
(MAR) is
directed away from electrical
devices.
8
.
9
.
INLET
OUT
LET
