background image

24

Brand Developers Australia Pty Limited

Brand Developers Limited

WARRANTY REGISTRATION PROCESS

Brand Developers Australia Pty Limited

 and 

Brand Developers Limited

 warrants each new ladder, to the 

original purchaser thereof, to be used and maintained properly. This warranty covers all parts of the ladder, 
including hinges and lock assemblies. This warranty shall be in effect for the Lifetime of the ladder covering 
Personal Private use or a period of 5 years covering Trade, Professional & Commercial use from the date of 
purchase. This shall be in lieu of any other warranty, expressed or implied, including, but not limited to, any 

implied warranty of merchantability or fitness for a particular purpose. Some Australian states do not allow 

limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Brand Developers Australia Pty Limited

 and 

Brand Developers Limited

 will repair or replace, at its option 

and without cost to the original purchaser, any ladder which has been found to be defective and is within the 
period of the warranty. All freight to and from the factory is to be paid for by the customer.

The factory addresses are as follows:

Australia -  

Brand Developers Aust Pty Ltd, 461 Plummer Street, 

 

PORT MELBOURNE, VIC 3207 AUSTRALIA 

 

New Zealand -  

Brand Developers Limited, Unit H, 686 Rosebank Road,   

 

Avondale, 1026  Auckland, NEW ZEALAND

The liability of 

Brand Developers Australia Pty Limited

 and 

Brand Developers Limited

 under this warranty 

shall be limited solely to repair or replacement of the ladder within the warranty period; and 

Brand Developers 

Australia Pty Limited

 and 

Brand Developers Limited

 shall not be liable, under any circumstances, for 

consequential or incidental damages, including, but not limited to, personal injury or labour costs. Some 
Australian states do not allow the exclusion or limitation of incidental or consequential damages, so the above 

limitation or exclusion may not apply to you. This warranty gives the original purchaser specific legal rights and 

you may also have other rights which vary from state to state.

Under no circumstances will 

Brand Developers Australia Pty Limited

 and 

Brand Developers Limited

 be 

responsible for any expense in connection with any repairs made by anyone other than the factory or authorized 

service station unless repairs have been specifically authorized in writing by 

Brand Developers Australia Pty 

Limited and Brand Developers Limited.

The warranty is void if the enclosed Warranty Registration Card is not completed and returned or an email has 
not been sent to register the product with 

Brand Developers Australia Pty Limited 

and 

Brand Developers 

Limited 

within 30 days of product delivery.

LIFETIME WARRANTY

PART FIVE

Summary of Contents for Transforma 24





























Reviews: