04/2021 V 1.0
VIEW 19F
09/14
Start to pull the Inline Panel back when
approaching the top.
Use the Nylon Block to ensure that the
Return Panel is level with the edge of
the Inline Panel.
Ensure the two panels are firmly fixed
together and remove Inline Packers.
Remove Packers and feed the Wedge
Gasket into the archway gap and trace
along the Glass on both sides.
Spray water on Glass Panel and use
Nylon Block to help feed Gasket.
Trim both Underframe Gasket Seals as
close to the edge as possible using a
blade.
Trim both of the Wall Profile seals at
the top face of the Wall Profile using a
blade.
33
34
35
36
