- 10 -
time. After the operation, click the Stop button (Button 6), the instrument
will stop working.
Button 4 and 8 are the function switch button, the operator can switch
free to 5M Seven-polar RF, 5M Five-polar RF, 5M Tri-polar RF function
interface in case not go back to the previous menu.
5M Seven-polar RF Operate Interface
8
1 9
2
10
11
3
4 5 6 7
1.
Time adjustment
Enter into 5M Seven-polar RF function
interface, the system default working time is
30 minutes, the operator may click (Button 1) ,
re-use (Button 10) & (Button 11) to regulate
time by need, time in minutes.
2. Power
adjustment
Power system default is "1", the operator firstly
press (Button 2). Power display cursor will
appear at this time, then use the (Button 10) & (Button 11) to adjust the
appropriate power, power adjustment range is 0-10 levels, generally
recommended that the hand and feet part with 3-6 levels,
abdomen, back,
buttocks
parts with 8-10 levels.
Operator set parameters related functions, can click the Start button
(Button 5), when the instrument starts working, time is countdown, and
working probe 640nm laser and RF starts working. According to need in
operation required by the adjustment method adjust the power, mode and
time. After the operation, click the Stop button (Button 5), the instrument
5M Seven-polar RF Operate
Interface
1. Time selection
2. Power selection
3. Function switch
（
（
（
（
Left
）
）
）
）
4. Return to main menu
5. Start/Stop
6. Return to previous menu
7. Function switch
（
（
（
（
Right
）
）
）
）
8. Time display
9. Power display
10. Time/Power/Mode increase
11.Time/Power/Mode decrease
