THE WORLD MODELS Super Chipmunk-90 RF, Instruction Manual

Super

Chipmunk

-

90

RF

P.1

Apply thread locker

Apply epoxy glue. 

Pierce the shaded portion

covering film.

Apply instant glue

(C.A.glue, super glue.)

Ensure smooth non-binding

movement while assembling.

Do not overlook this symbol !

P. 3 -11

Check all parts.  If you find any defective or missing parts contact your local dealer.  Please DRY FIT

and check for defects for all parts that will require CA or Epoxy for final assembly.  Any parts you

find to be defective after the gluing process may be difficult to remove for warranty replacement.  The

manufacturer will replace any defective parts, but will not extend to the parts that are good before 

gluing to defective parts during assembly.  Warranty will not cover any parts modified by customer

.

INDEX

BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS

P. 1
P. 2

P.11

BEFORE  YOU  BEGIN

Read through the manual before you begin, so you will have an overall idea of what to do.

Symbols used throughout this instruction manual comprise of the following : -

1

2

3

Assemble left and right

sides the same way.

Peel off shaded portion

covering film.

Drill holes with the specified

diameter (here:  3mm) .

Pay close attention here!

Cut off shaded portion.

Must be purchased separately !

Warning!

3mm

A004NPO31351603