10
5. Walking test
The walking test is used to test the detection area
and to restrict it if necessary.
¾
Turn the time potentiometer (min.) counterclock-
wise up to the stop.
The motion detector now only reacts to movements
(independent of brightness).
¾
Go diagonally to the detection area. After the
motion detector has detected a movement, it
switches on for 2 s.
¾
Pay attention to the direction of motion during
the test.
0
2
Sec
2 sec
Dusk
Time
Test mode
6. Alignment
•
The sensor can be rotated to left/right and
down by 90 °.
