47
GB
8. Troubleshooting
Subject to change without prior notice. Errors and omissions excepted.
9. Auxiliary table for settings with QuickSet plus
Note the settings used in the auxiliary table on pages 162 to 185.
Fault
Cause
The remote control cannot be
switched on, or the display
disappears when sending
Replace the battery
The LED in the detector does
not react on sending
Point the remote control exactly to the detector
when sending; The distance to the detector is too
large; Check the model selected in the remote
control; Detector is not remote controllable
Background lighting is auto-
matically deactivated.
Insert new battery.
Note: keep a spare battery to hand when using
background lighting!
CE Declaration of Conformity
Product complies with the requirements of the directive 2004/108/EC.