6
QUICK USE GUIDE:
1
GET READY
PREP YOURSELF
•
TIE LONG HAIR up above ears
•
REMOVE Any loose clothing (you may remain
clothed)
•
REMOVE any jewelry, piercing, or accessories
such as ties, scarves, necklaces, etc.
2
GET SET
PREP YOUR BUFFER
•
Fit appropriate accessory for intended use.
•
Attach snug-fitting extension cord to BFF cord.
•
Make sure BFF switch is in off position – “ O ”
•
Plug extension cord into safe wall outlet.
3
BUFF!
1.
Firmly grip around Gripping Area, pick up
machine, and hold away from the body. Turn
switch to ON position.
2.
Using the flat side, Gently let The BFF
™
glide
around your body, no added pressure needed,
allowing the weight of the machine to provide
pressure. Only below the neck!
3.
“Catch edge” or gently roll pad from flat side onto
the disk pad edge to achieve a deeper, more
isolated penetration of tissues.
IMPORTANT:
Do not use device on any area above
shoulders, directly on the spine, pubic area, or underarms.
Do not apply any pressure. Simply allow the weight of the
device to provide pressure. If you want more pressure,
simply “catch edge” which isolates and deepens pressure.
FITTING THE BONNETS
1.
Center the bonnet on the BodyBuffing Disc.
2.
Stretch one side of the bonnet over the foam pad.
3.
Pull the elastic edging over the foam pad evenly and
slowly. Pulling too hard on the foam pad may result in a
torn pad.
BONNET CLEANING
The Microfiber & Spa Luxe Bonnet can be hand washed or
machine-washed on gentle cycle. DO NOT use fabric
softener as it can clog the fibers. Allow to air dry on a towel
hook.
Summary of Contents for BFF 2.0
Page 1: ......
