29
designated for a specific wireless local area network
(WLAN).
ESSID Broadcast
Enable/disable ESSID Broadcast.
Enabling this feature broadcasts the ESSID across the
network.
Channel
Specifies the channel of the wireless network.
All devices on the network must share the same channel.
Auth Mode
Select
Open System
to communicate the key across the
network.
Select
Shared
to limit communication to only those
devices that share the same WEP key settings.
WEP enable
Select
Enable
to enter the WEP key.
Select
Disable
to disable the WEP key.
WEP has to be enabled when Auth Mode is set to
Shared
.
Key Length
The WEP Key can be set to 64 bit or 128 bit.
The WEP key may be constructed with these
alphanumeric characers: 0~9 and A~F.
When length is set to 64, you must enter 10 characters.
(e.g. 2FAB2CAFE0)
When length is set to 128, you must enter 26 characters.
(e.g.1234567890ABCDEF1234567890)
WEP KEY 1
Select WEP Key 1.
WEP KEY 2
Select WEP Key 2.
WEP KEY 3
Select WEP Key 3.
WEP KEY 4
Select WEP Key 4.
DHCP Server
Enable/Disable DHCP server on wireless network.
Start IP
Specifies the starting IP address available to be leased.
End IP
Specifies the end IP address available to be leased.
DNS Server
Displays the Domain Name Service (DNS) server IP
address.
Note:
-
The WLAN must have different segment setting from LAN 1 and LAN 2.
-
The WLAN will use the DNS server specified in the LAN 1 configuration.
DHCP Server Configuration
Summary of Contents for Y.E.S. Box N2100
Page 1: ...Y E S Box N2100 Your Enhanced Storage User s Manual...
Page 14: ...10...
