79
If you are using JBOD with one disk and would like to add a second disk …
If you started with one disk in JBOD mode, you can add a second disk at a later time.
When the second disk is installed, you can just select the second disk and click on
the
Create
button to create a volume equal to the size of two disks installed.
The data in the first disk will be preserved. During JBOD expansion, all the file
services will be stopped. The time for expansion depends on the size of the disks
installed. All the file services will be resumed after the expansion is finished.
If you are using JBOD with two disks and one of the disk failed…
If your first disk fails, then all the data is lost.
If your second disk fails, then the system will try to mount the disk, and you might still
be able to access the data in the first disk under read only mode. At this time, you
should try to recover as much data as you can to a different storage location.
Replace the failed disk and rebuild your RAID.
If you are using RAID 0 and one of the disks failed…
RAID 0 offers no data protection. If any of disks fails, all data is lost.
Solving Problems
When the system detects an error:
1. Login to the YES Box N2100 using your browser.
2. Go
to
the
System
menu and choose the
Logs
item.
3. The
System
Log
screen appears.
4. Click
the
Error
button and all recorded errors appear. These log entries help
you diagnose the problem. Most errors are due to improper use of the device or
hard drive damage. If hard drive damage is the problem, see the section that
follows.
5. If you are unable to solve the problem, please contact your dealer.
Summary of Contents for Y.E.S. Box N2100
Page 1: ...Y E S Box N2100 Your Enhanced Storage User s Manual...
Page 14: ...10...
