Doc.Ref
TgbVpn25x_en
Doc.version
1.2 – Nov.2004
VPN version
2.50
IPSec VPN Client User Manual
Property of Sistech SA - © Sistech 2004
11/11
6.
Click on “Open Tunnel” for establishing the IPSec VPN tunnel (only in “IPSec Configuration”
window)
4.3.2
Several Authentication or IPSec Configuration Phases
Several Authentication Phases can be configured. Therefore, one computer can establish IPSec VPN
connections with several gateways or other computers (peer to peer).
Similarly, several IPSec Configuration (phase 2) can be created for a same Authentication Phase (Phase 1).
4.3.3
Active or Non Active phase
A phase can be either “active” or “non active”. If a phase is “non active”, its settings will not be applied. This
feature can be used with a configuration composed of several VPN tunnels that do not need to be enabled
simultaneously.
Changing “active” to “non activate” state for a specific Phase can be achieved by a right-click on the phase name:
Active (or Non active)
Enable or disable the phase
All active
Enable all phases
Active Only
Disable every phase except the phase selected with the mouse.
4.4
Authentication or Phase 1
'Authentication' window will concern settings for Authentication Phase or Phase 1. It is also called IKE Negotiation
Phase.