11
10. Supplier Declaration/Safety Information
The device complies with European Directives:
2004/108/EG, RTTE 1999/5/EG sowie 2011/65/EU
Harmonized standards:
EN 60950-1, EN 61000-6-3, EN301489-1, EN300220-1 V2.4.1,
EN 61000-6-2, EN301489-3 und EN300220-2 V2.4.1
A safety information plate is on the left-hand side of the device
An embedded Class 3R (3B with the High Power version) laser
is installed. This means that when you open the device there is
a possibility of entering the range of power values that are
higher than Class 2 (3B with the High Power version). If
possible, do not point the laser at people. Do not look into the
laser beam even with optical instruments.
There are no parts to maintain or adjust inside the device.
Servicing may only be carried out by authorized persons.
Safety regulations for
THEIS Class 3R HIGH-POWER LASER DEVICES
Users must observe BGVB2 (Accident Prevention Regulations for
Laser Radiation in Germany).
•
Only trained personnel are allowed to operate this product to
avoid radiation with dangerous laser light.
•
The laser is subject to Class 3R
•
Do not remove the warning signs on the device!
•
Observe and secure the beam path over a large distance!
